Ir para o conteúdo

Leapmotor charging cable

Pesquise seu Leapmotor

Leapmotor

Leapmotor charging cable

Leapmotor's European range spans the compact T03, the C10 SUV and the newer B-series models sold through Leapmotor International. All use a Type 2 inlet for AC charging and a CCS2 connector for DC rapid charging, so one Voldt® cable covers the range. They differ in onboard AC capacity: single-phase on the T03, full three-phase on the C10 and the newer cars.

Leapmotor charging specs and cable recommendations

The Leapmotor T03 charges single-phase on AC, up to 6.6 kW. A Voldt® 7.4 kW single-phase cable draws its full onboard rate at a home socket, a wall box or a public charge point.

The Leapmotor C10 and the newer B-series step up to an 11 kW three-phase onboard charger. A Voldt® 11 kW three-phase cable matches that capacity, and a 22 kW cable future-proofs the setup without any day-to-day trade-off. Every Leapmotor uses a Type 2 inlet, so any Voldt® Type 2 charging cable connects without an adapter.

Getting cable length right

The distance between your charge point and the car's inlet varies more than most people expect, and it changes depending on which direction you pull in, which side of the car the inlet is on, and whether the cable needs to clear a kerb or run along a wall. A 4 m cable works in a contained garage setup where the wall box is installed directly beside the parking space. For standard driveways and carports, 6 m or 8 m covers both inlet positions without pulling taut or leaving large coils on the ground.

At public charge points, the situation is less predictable. Bays fill up, angles vary, and the post is not always where you expect it. An 8 m cable handles most of these scenarios comfortably. If you regularly charge at workplaces or destination chargers with longer cable runs, or share a home charge point between two vehicles, 10 m or 15 m removes the variables entirely.

Cable length Best suited for
4 m Compact garage with wall box directly beside the parking spot
6 m Standard driveway or carport, inlet on either side of the vehicle
8 m Flexible home and public charging, covers most charge point layouts
10 m Larger vehicles, shared parking, or charge points set further from the bay
15 m Remote charge points, multi-vehicle setups, or commercial locations

A portable charger worth keeping in the boot

A Voldt® portable EV charger plugs into a standard Schuko socket for 3.7 kW or a CEE industrial outlet for up to 22 kW three-phase, with no wall box installation required. Rated IP67, it handles outdoor use in all conditions. On a compact EV like the T03 it works well as a primary option where a wall box is not practical, and on the C10 as a travel backup.

Why Voldt®?

Voldt® cables carry CE, UKCA and TÜV certification, are rated IP67, and come with a 3-year warranty as standard. Free shipping and a 100-day hassle-free return policy apply to every order. Stock is held in-market across the UK and Europe, so whichever Leapmotor you drive and whichever length you need, delivery is fast and reliable.